Monocrystalline PV Panels manufacturers http://www.oritron-solar.com/photovoltaic-panels/monocrystalline-pv-panels/

Reacties · 154 Uitzichten

Monocrystalline PV Panels manufacturers http://www.oritron-solar.com/photovoltaic-panels/monocrystalline-pv-panels/

Monocrystalline PV Panels manufacturers Number of Cells60pcs, 72pcs. etc Watts360w -380w Module Size1755*1038*35mm Weight20kg Glass3.2mm high transmittance, reinforced glass BackplaneAnti-aging film BoxIP68 rated ConnectorMC4 compatible connector Features Aesthetic appearance with excellent efficiency; Outstanding performance in Low-Light; High transparent, Low-Iron, Tempered Glass; Unique Advanced Technology giving the panel good performance; Ability to withstand High Wind-Pressure and Snow-Load; Advanced module sealing technology to eliminate leakage and frame deformation; Ability to meet customized customer's specific requirements; Easy Installation Maintance; Detail Glass Reinforced glass Translucency of normal luminance is increased by 2% Module efficiency is increased by 2% Service life is as long as 25 years Solar Cell High Eticiency PV Cells Appearance Consistency Color sorting ensure consistent appearance on each module Anti-PID Frame Conventional frame Boost bearing capability and prolong service life Serrated-clip design tensile strength Seal-lip designglue injection Junction box Conventional standalone edition and engineering custom edition Quality diode ensures module running safety IP68 protection level Heat dissipation Long service life Application Philppine Water Project Antofagasta, Chile-Solar Photovoltaic System Cairo, Egypt Project Solar Cordoba, Argentina-Solar Photovoltaic System Chile-Solar Photovoltaic Energy Valparaiso, Chile Solar Photovoltaic Pumping System Providencia, Chile- Solar Photovoltaic System Module installation 鈼?When carrying the modules, two hands are required to grasp the modules and keep a level of stability. It is forbidden to shake severely, carry the module by one person, drop the module, pull the connecting line of junction box and handle two and more modules. 鈼?Place the modules on a flat ground, put the cardboard in the bottom and the glass surface is forbidden to directly touch the ground. 鈼?When the module is placed on the ground, it is forbidden to stack debris, step on, sit down and make other actions that may cause the deformation for the modules. 鈼?Do not step on the modules during installation. Do not drop the module on the bracket. 鈼?When the modules is installed on the buildings or roofs, it is necessary to ensure that they are securely fastened and will not be damaged by strong wind and snow. 鈼?Ensure that the back of modules good ventilation for cooling the modules. 鈼?When installing module on the roofs, make sure the roof structure is suitable. In addition, the roofs must be properly sealed to prevent leakage. 鈼?The gap between the module frame and wall or roof should be 115mm at least. If there are other installation methods, it may affect assessment of fire rating. 鈼?The spacing between two modules should be at least 10mm. 鈼?The installation should not block the module's drain hole.Monocrystalline PV Panels manufacturers website:http://www.oritron-solar.com/photovoltaic-panels/monocrystalline-pv-panels/

Reacties